Warning: file_put_contents(): Only 0 of 5394 bytes written, possibly out of free disk space in /home/wwwbarghoenergy/public_html/libraries/joomla/filesystem/file.php on line 440
GM6 & GM4

GM6 & GM4

 

 

 

 

GM6 & GM4

 

GM6 & GM4 are module-type PLC that consist of various modules including basic module(CPU, Power, I/O), communication module and special module. And through various modules, user can configure the optimum system for industry environment.

Manual Catalog Technical Data Certification CAD Data Software

Features
  • High performance features with compact size
  • High-speed processing using dedicated CPU
  • Designed by international standard language (IEC61131-3): IL, LD, SFC
  • Max. I/O points: 384 points
 
Specification
Item Specifications Remark
GM6-CPUA GM6-CPUB GM6-CPUC
Operation method Cyclic execution of stored program, Time-driven operation, Internal task operation  
I/O control method Scan synchronized batch processing method (Refresh method)  
Program language LD (Ladder Diagram) IL (Instruction List) SFC (Sequential Function Chart)  
Number of instructions Operator LD : 13, IL : 20  
Standard function 194  
Standard function block 12  
Special function block Each special module has its own special function block.  
Processing speed Operator 0.5㎲/instruction  
Standard function 0.5㎲/step  
Standard function block  
Programming memory capacity (Kbyte) 68Kbyte Built-in flash memory (128Kbyte)
I/O points 192 points (With 32-pt modules) 384 points (With 64-pt modules)  
Data memory Direct variable area (D/A) 2~ 8Kbyte Setting in GMWIN
Symbolic variable area (SVA) 30K- Direct variable area  
Timer No limitation Timer range: 0.001 ~ 4294967sec(1,193 hours) 20 bytes per 1 timer in SVA
Counter No limitation No limitation : -32768 ~ +32767 8 bytes per 1 counter in SVA
Operation mode RUN, Stop, Debug, Pause  
Data retention at power failure Set to "Retain' at data declaration  
Number of program blocks 100  
Program type Scan 100  
Time-driven 8 8 in total
External interrupt 8
Internal 8
Initialization 1 (_INIT)  
Self-diagnostic Watchdog timer, Memory error, I/O error, Batter error, Power supply error  
Restart mode Cold, Warm  
Base type 4/6/8/12 slot Expansion is not available.
Built-in functions - Cnet (RS-232C) - PID control - Cnet (RS-422/485) - RTC function - PID control - Cnet (RS-232C) - HSC (50kHz) - RTC function  

 

 

 

 

Features
  • Max. I/O points: GM4A/B (2,048), GM4C (3,584)
  • Fast processing time with high-speed gate array (0.2㎲/step)
  • Fit for small- and medium-sized manufacturing line network
  • In case of remote system configuration, large-scale control available
  • Downsizing and high performance/function - 35W × 135H × 122D
  • Cnet, DeviceNet, Fast Ethernet, Fnet, Profibus-DP, Rnet support
  • Special function modules Analog I/O, PID, High-speed counter, Position control (APM), AT, TC, RTD, etc
Specification
Item Specifications Remark
Operation method Cyclic execution of stored program, Time-driven operation, Internal task operation  
I/O control method Scan synchronized batch processing method (Refresh method)  
Program language LD (Ladder Diagram) IL (Instruction List) SFC (Sequential Function Chart)  
Number of instructions Operator LD : 13, IL : 20  
Standard function 194  
Standard function block 12  
Special function block Each special module has its own special function block.  
Processing speed Operator 0.12㎲/instruction  
Standard function 0.12㎲/step  
Standard function block
Programming memory capacity 128Kbyte  
I/O points 1,792 points (With 32-pt module

More in this category: « XBM/XBC Smart I/O »

Abute Us

Contact Us

  • Central Shop : No.235,First Floor,Alboorz 20 Shoping Center,Lale zar no,Tehran,Iran
  • Phone : +98 21 6634 47 14 - 6634 46 96

                +98 21 6634 10 91 - 6634 10 92

  • Fax: +98 21 6634 10 90
  • Cell Phone: (M.Mahmudi) +98 912 524 77 38

Our Location

Top